Biker leather jackets have always been an ultimate choice for the bikers around the globe. Most of the bikers use them as an essential part of their every day clothing. This excessive use results in the fading of color of the jackets. This makes the coolest thing you bought look old and aged. They loss their shine and the essence which makes them look new. Although many bikers prefer this look but many do not like it this way. Most think that it is the time when they need to buy new ones if they do not know that they can restore the biker leather jackets back to the form they were when they were newly purchased. Yes it is very convenient and does not take much time. It just requires a bit of an effort which is not anything like lifting tons of load on your shoulders the effort required is simply putting some of your muscles to work in order to restore your biker leather jackets back to their original form.
So this is how it works. The material required is easily available at various leather shops and at many shoe care providers or even cobblers. When you have the required materials, wipe the dirt off your biker leather jackets by just a plain wet cloth make sure that the cloth is clean and you do not need any sort of detergent application here. You are also required to deglaze your coolest accessory in order to remove various finishes, oils etc that are applied to the surface of the leather jackets. It is a pre requisite to applying color to the biker jackets as if oil, finishes or waxes are still left on the surface then the surface will not catch the color properly. You just should select a place where there is no chance that the debris will fall on your biker leather jackets when you are applying color to it.
You should also ensure the maximum exposure of each and every portion of you biker leather jackets while you paint them. This can be achieved by hanging the jacket over an already filled hangar on which there are heavy clothes hung already this will help to plump up your biker leather jackets and thus will guarantee maximum exposure of even the places that were hidden under the wrinkles. You should cover the clothes hung on the hanger below the jacket with a trash bag or other plastic bag that is enough to cover the clothes properly so that they do not get the color that is being sprayed. Now you are all prepared to apply the paint.
Color selection is also to be done carefully and the color which you have selected should match the color of the jacket too. Apply first coat of paint by spraying lightly, going from top to the bottom of the biker leather jackets. Repeat the procedure a single time more but give a gap of at least 15 minutes after you apply the first coat so that it can dry then continue with spraying the second coat.
This will we restore your biker leather jackets like they were never worn before. You can use further finishes as well to get the desired effects.